| |
|
ES603 |
|
|
The Most Cost-effective Sensor for All Devices |
|
| |
|
Key Features
— Cost-effective: High performance with integrated features thus greatly reducing the BOM cost.
— Easy Integration: Ultra-small package to fit into latest PC and mobile devices.
— Fly-Estimation technology : Delivers complete fingerprint without image reconstruction.
— Lower power consumption : Minimizes the impact on battery life. |
| |
Overview
The most cost-effective solution
With an ultra small fingerprint sensor package (13.5mm x 3.5mm), the ES603-WB can greatly reduce the component count, hence saving total BOM (bill of materials) cost for OEM manufacturers.
Suitable for all devices
The ES603-WB can easily be integrated into any device, even the smallest and thinnest netbooks, CULV, smartphones or other portable devices. This high performance sensor is the best choice for consumer electronics equipped with fingerprint sensors.
Advanced technology
Using Egistec's patented Fly-Estimation® technology, ES603 delivers a whole, complete image directly without utilizing any softwre reconstruction methods. During imaging, EgisTec's output signal for different skin conditions like
sweaty, scarred and dry skin.
In addition, based on E-Field (AC-Capacitance) imaging between the sneosr electrode matrix and the living layer under the skin, EgisTec's sensor is virtually immune from finger spoofing (fake fingers) risks.
Furthermore, this sensor can support advanced navigation functions, which allows the ES603 sensor to rotate, click and double-click like a mouse or joystick.
Durability
With special hard coating of more than 4H on the sensor surface, the wear-resistant surface of the sensor is capable to withstand more than 10 million finger swipes.
|
|
Specification |
Perfect Image Quality
— 192 x 4 pixels @ 508 dpi
— 9.6 mm x 0.2 mm sensor array
— Every fingerprint recognizable by the auto-calibration technology
|
|
High Performance
— Patented Fly-EstimationTM Technology for a complete fingerprint delivery.
— Built-in USB2.0 full speed interface.
— Full graphical navigation.
— Supports major Serial Peripheral Interface (SPI) flash vendors for Pre-Boot Authentication (PBA) solutions.
— Embedded contact sensor for finger detection.
— Best False Acceptance Rate (FAR)/ False Rejection Rate (FRR).
|
|
Power Management
— 3.3~3.6V single supply.
— Typical 15 mA @ USB2.0 imaging/navigating.
— Typical <500uA finger detect mode.
— Supports USB selective suspend mode.
— Complies with Advanced Configuration and Power Interface (ACPI).
|
|
Robust Design
— ESD immunity IEC 61000-4-2 Level 4 (+/- 15KV).
— 0°C ~ 70°C operating temperature.
— -40°C ~ 150°C storage temperature.
— Withstands over 10 million swipes. |
|
Easy-To-Produce Package
— 30-pin LGA ROHS package.
— 13.5 mm × 3.5 mm × 1.8 mm.
|
|
Supported Operating Systems
— Microsoft Windows 7, Vista and XP with USB driver WHQL certification.
— Supports Windows Biometric Framework (WBF).
— Others available upon request.
|
|
|
|
|
| |
|
|
|
|
